Re: Synchronous Motor - How to determine . . .

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "tesla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-paradise-dot-net.nz>

Or
4) Magnetic pick up (I used the coil of a reed relay) nail thru core and
sensed the passing of the stainless bolts on the SRSG feed to CRO and
compare to mains.
Waveform.
Best
Ted L in NZ
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, August 16, 2002 3:09 PM
Subject: Synchronous Motor - How to determine . . .


> Original poster: "Daniel McCauley by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <dhmccauley-at-spacecatlighting-dot-com>
>
> I have my synchronous motor with the rotor set-up.  How am I able to tell
if
> my motor is running at the correct speed and that the rotational weight of
> my rotor is not slowing the motor down.  Any easy way to determine this?
I
> don't have access to any type of motor tachometer whether it be a physical
> connect one or ones that use a light beam and a piece of tape on the
shaft.
>
> Thanks
> Dan
>
>
>
>
>