Re: Mirror Ball as VDG Sphere?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Roger Drosd by way of Terry Fritz <twftesla-at-qwest-dot-net>" <roger-at-gcisnow-dot-com>

Take your globe to a local welding shop.  They can cut a clean hole of any
size with a plasma cutter.

Roger Drosd
roger-at-gcisnow-dot-com


----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Monday, August 26, 2002 11:29 AM
Subject: Re: Mirror Ball as VDG Sphere?


> Original poster: "davep by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<davep-at-quik-dot-com>
>
> >  DWP: drill a  guide hole (yes it will be rough) then
>
> > punch your hole with a GREENLY
>
> Greenlee
> Uhuh.  I have 'several'.
> As noted, they require access to both sides of the
> piece.
>
> > HOLE PUNCH.  The punch is costly for just one hole, but it
>
> > will make a clean hole every time. You can get the punch
>
> > from 3/8" to 4" so you can plan your size neaded. I role
>
> > the edge with a hard wood cone in a fast
> > drill. It smokes and stinks, but it works well.
>