[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Source for PFC caps
Original poster: "Jonathan Peakall by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jpeakall-at-mcn-dot-org>
Dave,
I got my PFC caps at: http://www.usamfg-dot-net/
They were dirt cheap. I bought some multi-valued ones, and it is nice for
getting the right emperical value after starting at the calculated value.
Hope this helps,
Jonathan Peakall
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, February 03, 2002 2:11 PM
Subject: Source for PFC caps
> Original poster: "Dave Leddon by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<leddon-at-attbi-dot-com>
>
> Does anyone know of a surplus dealer who has motor run caps acceptable for
> use in power factor correction? I ordered three of the 135 MFD -at- 265 VAC
> capacitors from Herbach & Rademan, but just received notification that
this
> cap is out of stock and no longer available. I calculated that I need 332
> MFD total to achieve a power factor of 1.0 on my nst.
>
> Dave
>
>
>
>