[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Newbie Question - Capacitors
Original poster: "Gregory Hunter by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ghunter31014-at-yahoo-dot-com>
Hi Jaime,
Probably the cheapest way to build an MMC these days
is with Geek group caps. These are polypropylene film
pulse caps, which are the best kind. Your order could
take a few weeks or even a few months to arrive, so
you could build a bottle cap to get started with. I
suggest 12oz beer bottles with clear, uncolored glass.
For a 15kv/60ma NST, a 12-pack of bottles wired in
parallel will give you about .01uF. The beer bottles
will get you sparking now, rather than 5 months from
now.
Regards,
Greg
http://hot-streamer-dot-com/greg
--- Tesla list <tesla-at-pupman-dot-com> wrote:
> Original poster: "by way of Terry Fritz
> <twftesla-at-qwest-dot-net>" <dbanse-at-comcast-dot-net>
>
> Hey guys,
>
> I am pretty new to tesla coil building.
>
> I already understand the concept, and have my
> transformer ready to go.....(I
> already fried a few computer parts..hehe)
>
> Anyway, I am having trouble figuring out what type
> of capacitor I need.
>
> I have a 15kV 60mA NST
>
> I read about Bottle caps, Rolled caps, tank caps,
> MMC caps, Geek group caps
> (Shipping takes up to 5 months for
> these...)....etc.etc
>
> From what I have read, MMC caps seem to be the best.
>
>
> I am collecting some bottles in the mean time, (SOBE
> Black Tea, and some Stubbs
> Barbeque Sauce bottles) but tend to lean toward the
> MMC's
>
> Can anyone tell me what the best would be for the
> 15kV 60mA NST?
>
> I ran TESLAC, and it recommended Max Primary
> Capacitance of .0075 u.f.d....and
> a Voltage rating of 37,500 (if I run a static spark
> gap).....does this seem
> correct??My local (well not that
> local...)electronics store only has caps rated
> at..
>
> .0082 2000vdc
> .0068 2000vdc
> .0056 2000vdc
> .0022 2000vdc
>
> These were the only ones they had rated over
> 1600v....
>
> Can any of these be useful??
>
> They were around a $1 a shot.....
>
> If they can be useful, how many would I need, and in
> what configuration??
>
> Thanks alot....
> newbie coiler,
> Jaime Banse
>
>
>