[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: helical sparks
Original poster: "David Thomson by way of Terry Fritz <twftesla-at-qwest-dot-net>" <dave-at-volantis-dot-org>
Hi Gary,
Those are fascinating sparks. Have you taken any measurements in the fields
where the helix begins and ends? Do the starting and ending points fall
within a certain range over time?
I'll keep my eyes open for references to this phenomenon and post it if I
see it.
BTW, your paper on sparks is informative and entertaining.
Dave
-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Thursday, February 14, 2002 10:10 PM
To: tesla-at-pupman-dot-com
Subject: helical sparks
Original poster: "Gary Johnson by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<gjohnson-at-ksu.edu>
I was trying out a new digital camera yesterday, taking photos of sparks
from my solid state coil. Several of the photos are at my web site:
www.eece.ksu.edu/~gjohnson as the jpeg files. The sparks are about 30
inches long, leaving a small bump on a 30 inch diameter sphere. The peak
power is about 25 kW when the spark begins. Power is applied for 10 ms per
spark.
The main spark channel has a central shaft perhaps 5 to 10 mm in diameter.
In addition, there is a helix extending out another 10 to 20 mm. It looks a
little like a drill bit or perhaps more like a grain auger. It does not form
until the spark is several inches away from the spark emitting point, and
will be smeared when the spark hits a dog leg.
Is this a well known phenomenon of sparks, described in some classic paper
of many years ago? I don't recall stumbling across it. It could be an
instability that occurs in hot fusion. I suspect a quantitative explanation
would be challenging. In the meantime, I find the sparks to be pretty.
Gary Johnson