RE: Small Pulse cap needed

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Basura, Brian by way of Terry Fritz <twftesla-at-qwest-dot-net>" <brian.basura-at-unistudios-dot-com>

If you are after .001uF then one solution would to use a string of ten
.010uF Panasonics ECW-H16103-JV (DigiKey p/n P10507-ND) for $1.44ea.

Regards,
Brian B.

 -----Original Message-----
From: 	Tesla list [mailto:tesla-at-pupman-dot-com] 
Sent:	Wednesday, January 02, 2002 10:17 AM
To:	tesla-at-pupman-dot-com
Subject:	Small Pulse cap needed

Original poster: "Jason by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<jasonp-at-btinternet-dot-com>

Hi all,

I need an 0.001uF (1nF) pulse cap to use as the primary cap in my tiny coil.
The coil itself is wound with 36awg, 4.2" by 0.6" on a glass test tube.

I cannot really use MMCs because the requrirement for a small cap would mean
stringing over 1000 68nF caps together :o)

Does anyone have a cap between 0.6 and 2nF lying around that they can sell
me, pop in the post, whatever? the voltage needs to be about 15KV, running
of a 6/25 neon.

Best Regards,
Jason

--------------------------------------------
Geek #1139 G-1 - www.thegeekgroup-dot-org
"Because the Geek will inherit the Earth!!!"
--------------------------------------------