Re: Charging Chokes...Again

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "S & J Young by way of Terry Fritz <twftesla-at-qwest-dot-net>" <youngs-at-konnections-dot-net>

Yes.  I use them in a dual MOT voltage doubler supply.  Use a variac to
slowly ramp up power to the MOTS to limit in-rush current when you turn on
the supply, or add a few hundred ohms of resistance in series with the
diodes if you are going to hit the MOTS with full power (no variac).
Typical oven diodes are rated for at least 350 ma - some at 550 ma.
--Steve
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Friday, January 04, 2002 5:57 PM
Subject: RE: Charging Chokes...Again


> Original poster: "David Boss by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<d.boss-at-Center7-dot-com>
>
> Could I use the microwave oven diodes in place of a 1n4007 string?
> Thanks
> Dave
>
> -----Original Message-----
> From: Tesla list [mailto:tesla-at-pupman-dot-com]
> Sent: Wednesday, December 26, 2001 6:15 PM
> To: tesla-at-pupman-dot-com
> Subject: Charging Chokes...Again
>
>
> Original poster: "Gregory Hunter by way of Terry Fritz
<twftesla-at-qwest-dot-net>"
> <ghunter31014-at-yahoo-dot-com>
>
> Dear List,
>
> Submitted for your approval:
>
> http://hot-streamer-dot-com/greg/dctc.htm
>
> Charging choke info for the non-engineer
>
> Happy New Year
>
> Greg
>
> __________________________________________________
> Do You Yahoo!?
> Send your FREE holiday greetings online!
> http://greetings.yahoo-dot-com
>
>
>
>