active coiler list updates gone...and replied to the wrong address

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Joe Duva by way of Terry Fritz <twftesla-at-qwest-dot-net>" <JDuva-at-BayTechnologies-dot-net>

Terry, all,

   First off, sorry about replying to the list instead of Shad about his
primary supports.  I got alittle excited over getting my mail account back
right as th tesla list spit that email at me. :)

   Second, and I again apologize, i that I just lost EVERYTHING to do with
my email account.  I lost my contacts, I lost my inbox, and I lost my saved
messages...including all the changes that were scheduledto be made to the
Active Coiler List!!  I can't remember who sent me mail from several months
ago to get put on th list, who needed their info updated/changed, or
anything that was sent my way.  I need everybody to resend me all of their
info so I can compile another list of changes!  PLEASE!  This time, I
promise to update the list right away, no matter how many changes come in,
even if it's just one.  If anybody has forgotten what I need, or has never
seen this before, I need your name, email address, city/state location (or
equivalent), website if you've got one, and a brief summary of your coiling
experience.  For those that don't know where this list is, it can be found
on Terry's website at:
 http://hot-streamer-dot-com/jduva/download.html.  I apologize once again for
losing all of this information. :(

Thanks and take care,
Joe Duva



-----Original Message-----
From: Joe Duva 
Sent: Friday, January 25, 2002 2:54 PM
To: 'Tesla list'
Subject: RE: Un-Needed Primary Supports


are they already spoken for? :)
-Joe

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Friday, January 25, 2002 2:09 PM
To: tesla-at-pupman-dot-com
Subject: Un-Needed Primary Supports


Original poster: "sundog by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<sundog-at-timeship-dot-net>

Hi All!
    I have a set of primary supports that I don't need. They're 1/4" thick
lexan, slotted for 1/4" copper tubing, 1/2" turn-to-turn (1/4" between the
turns).  Each turn has a hole underneath it for a ziptie.  Originally they
were drilled and tapped for 10x32 nylon bolts, but I now just use Plumbers
Goop to secure my primary supports. At the moment, the supports are slotted
for ~20 turns, but I'm going to cut them down to 10-12 turns because some
are bent.  There are some scratches and nicks in the plastic, and some of
the edges are chipped where I was was cutting the slots on the tablesaw.
There's 6 supports (not optimal but it works).  I have no need for them, but
I hate to see good parts go into the bin or sit on the shelf because I don't
need 'em.  It'll save someone some time anyway, and get 'em off my shelf :)

First email into sundog-at-timeship-dot-net get's 'em.  I'll cover shipping (it'll
only be a few bucks), UPS ground.

same construction technique as used on these
http://sundog.timeship-dot-net/HV/3_inch_coil/primary_supports.jpg
I haven't had any arcing turn to turn or carbon tracking along the supports.

Any takers?
------------------------------------
Shad (Sundog)
G-1 #1203
"To call someone crazy just shows
you can't understand their views on Life."