RE: Dead MMC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Alex Madsen by way of Terry Fritz <twftesla-at-qwest-dot-net>" <alexmadsen-at-yahoo-dot-com>

Do you have a safety gap (properly set) and NST filter in the circuit? If
not these my fix the $100 paperweight problem.
Alex Madsen




-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Saturday, January 26, 2002 11:48 AM
To: tesla-at-pupman-dot-com
Subject: Dead MMC


Original poster: "Marry Krutsch by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<u236-at-earthlink-dot-net>

Hi everybody! (again)

	At Gary Lau's request, I will elaborate on the failures of my dying
MMC.

	My MMC is a 0.1 uF unit, using 90 630VDC 1uF caps that are supposedly
metalized polypropolene.  I use 30 in series, then put three 30 unit
banks in parallel for a grand total of 0.1 uf at 18KVDC..


_________________________________________________________
Do You Yahoo!?
Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com