Re: CURSE Primary/ Grounded-centre or grounded edge?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Brian by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ka1bbg-at-webryders-dot-net>

Hi, go to any roofer or sheet metal shop that does copper work, you might be
able to get strips sheared from left over's and at the worst pay junk copper
price or maybe get for free! cul brian f.

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Tuesday, June 11, 2002 10:21 PM
Subject: Re: CURSE Primary/ Grounded-centre or grounded edge?


> Original poster: "Jim Lux by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<jimlux-at-earthlink-dot-net>
>
> I should think that you can get copper bar stock in any arbitrary
thickness
> (up to inches).  You might need to have it rolled to size from some larger
> dimensioned billet.
>
> ----- Original Message -----
> From: "Tesla list" <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Tuesday, June 11, 2002 6:27 PM
> Subject: Re: CURSE Primary/ Grounded-centre or grounded edge?
>
>
> > Original poster: "rob by way of Terry Fritz <twftesla-at-qwest-dot-net>"
> <rob-at-pythonemproject-dot-com>
> >
> > Tesla list wrote:
> > >
> > > Original poster: "Loudner, Godfrey by way of Terry Fritz
> > <twftesla-at-qwest-dot-net>" <gloudner-at-SINTE.EDU>
> > >
> > > Hello Scot
> > >
> > > I use to have access to some kind of big roller press. By successively
> > > decreasing the distance between the rollers, a penny could be
flattened
> to a
> > > large disc. If the penny was rolled too thin, cracks would appear. Do
> you
> > > think that copper ribbon wire could be rolled in the same fashion from
> round
> > > copper wire? Maybe heating the wire before rolling would improve the
> > > procedure.
> > >
> > > Godfrey Loudner
> > >
> > > > -----Original Message-----
> > > > From: Tesla list [SMTP:tesla-at-pupman-dot-com]
> > > > Sent: Monday, June 10, 2002 10:09 PM
> > > > To:   tesla-at-pupman-dot-com
> > > > Subject:      Re: CURSE Primary/ Grounded-centre or grounded edge?
> > > >
> > > >
> > > > Now     where do I find copper ribbon of sufficient size and length
;)
> > > > ??
> > > >
> > > >
> > > >
> > > > Scot D
> > > >
> > > >
> > > >
> >
> > I have seen rectangular enameled wire used in power transformers, so you
> > must be able to get it commercially.  I just wonder how big of wire you
> > can get?  The stuff I saw couldn't have been more than 1/4" wide.  Rob.
> >
> > --
> > -----------------------------
> > The Numeric Python EM Project
> >
> > www.pythonemproject-dot-com
> >
> >
> >
>
>
>
>