Re: HV resistors for MMC

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Steven Ward by way of Terry Fritz <twftesla-at-qwest-dot-net>" <srward16-at-hotmail-dot-com>

Ive bought 1/2w 2200v 10meg resistors from allied electronics.  100 for $8 
US.  they have a $25 minimum order.  They withstand short circuiting my 
9000v NST through them, so they must be pretty good.

Steve Ward


>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: Re: HV resistors for MMC
>Date: Thu, 27 Jun 2002 08:09:18 -0600
>
>Original poster: "Scott Hanson by way of Terry Fritz <twftesla-at-qwest-dot-net>" 
><huil888-at-surfside-dot-net>
>
>Sean -
>
>Better go back and re-check the Digikey price list. The actual pricing is
>$4.80 EACH, not $4.80 per 50 pieces.
>
>The price drops to $2.33 each in quantities of 50, still an order of
>magnitude too pricey for MMC use.
>
>If you find these anywhere for 9 cents each, please let me know!
>
>"If something seems too good to be true ......"
>
>BR,
>Scott Hanson
>----- Original Message -----
>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: <tesla-at-pupman-dot-com>
>Sent: Wednesday, June 26, 2002 7:28 AM
>Subject: HV resistors for MMC
>
>
> > Original poster: "Sean Taylor by way of Terry Fritz 
><twftesla-at-qwest-dot-net>"
><taylorss-at-rose-hulman.edu>
> >
> > I don't know if anyone has brought up these resistors before, but I was
> > looking around on digikey, and found these: MOX400J-10M-ND,
> > http://www.ohmite-dot-com/catalog/pdf/v_minimox.pdf, they are the 
>mox-400-23,
> > the epoxy coated ones.  Currently only $4.80 for 50 of them, not too 
>bad.
> > Anyone use these before? Don't know why they wouldn't work, they're 
>rated
>at
> > 3/4 W, and 2500 V!
> >
> > Sean Taylor
> >
> >
> >
> > ---
> > [This E-mail scanned for viruses by SURFSIDE INTERNET]
> >
> >
>
>
>
>