RE: is it useable?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Mccauley, Daniel H by way of Terry Fritz <twftesla-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>



Isolation transformers do not do much as far as EMI is concerned especially
at high frequencies.
You still need a EMI filter.  

Dan




Its huge - I'd personally strip the secondary off the core, gap it and use
it as a 30A ballast for a PT! Having said that, isolation transformers are
very good filters, stopping EMI getting back into the line.

Best Regards,

Jason
[UK Geek #1139 Rank G-2]
[HV / Tesla / Laser / Comp]
[  www.thegeekgroup-dot-org   ]
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Sunday, October 06, 2002 7:29 PM
Subject: is it useable?


> Original poster: "Cajun Coiler by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<cajuncoiler-at-cox-dot-net>
>
>
> While cleaning out the lab, I found an old friend hiding amongst the
> families of dust-bunnies... a 120/240 15A isolation transformer.  He
> was extracted from an ultrasound controller, back in `94. See it at:
> http://members.cox-dot-net/cajuncoiler/Images/it.jpg
>
> Question is: can it be used in some useful function in a Tesla Coil?
> Keep in mind, the 15A rating is a guesstimate, going by the internal
> wire size, but seems to handle 15A with no significant heat build-up.
> (could secretly be a 20, maybe?)
>
> The only clue I have, as to it's manufacturer, is what's left of a
> small gold logo label on top... starts with "B", ends with "on".
>
> ---
> C.L. Mayeux
> Owner, MSB Data Systems
> poohbear1961-at-cox-dot-net
> http://www.msbdatasystems.tk
>
>
>
>