[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

water filled tubing primary?

To: tesla-at-pupman-dot-com
Subject: water filled tubing primary?
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Tue, 10 Sep 2002 20:35:21 -0600
Resent-Date: Tue, 10 Sep 2002 20:43:41 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <nV7huB.A.DTE.hwqf9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <Beans45601-at-aol-dot-com>

Could you (in theory) use water filled (lets say, 1/4 inch) tubing for your
primary?  I was thinking that you could fill the tubing, cap it off, then use
needles to puncture the tubing to get to the water and thats how you would tap
it and charge it. I know this has lots of flaws in the idea, but, could it be
done?
thanks
Adam

Prev by Date: Re: shorted primary turns = bigger sparks strangeness
Next by Date: Ariel: Works Again, then dies--I do nothing
Prev by thread: Re: big secondaries
Next by thread: Re: water filled tubing primary?
Index(es):
- Date
- Thread