[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

6 MOT primary Voltage

To: tesla-at-pupman-dot-com
Subject: 6 MOT primary Voltage
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sun, 15 Sep 2002 12:47:28 -0600
Resent-Date: Sun, 15 Sep 2002 12:52:56 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <6w6BkD.A.QX.xbNh9-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "tesla by way of Terry Fritz <twftesla-at-qwest-dot-net>" <tesla-at-paradise-dot-net.nz>

Team
Just tested a 6 MOT system with 300bps SRSG. Mots have total of 22mH primary
ballasting

The safety gap (across SRSG) set at 10mm fired furiously which suggests at
least 30kV across it.
This seems a lot given Vp ex MOT's is only 13kV or so, Has anybody
experienced mains resonant rise in their MOT primaries and if so what was
config and MMC size.
Tnx
Ted L in NZ

Prev by Date: First light with new MMC PLEASE HELP!!
Next by Date: Re: Does my transformer have PCB oil????????
Prev by thread: RE: First light with new MMC PLEASE HELP!!
Next by thread: Re: 6 MOT primary Voltage
Index(es):
- Date
- Thread