[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Magnifier conversion

To: tesla-at-pupman-dot-com
Subject: RE: Magnifier conversion
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Mon, 14 Apr 2003 20:47:19 -0600
Resent-Date: Mon, 14 Apr 2003 22:24:43 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <HaTojC.A.MyD.Hm4m--at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Lau, Gary by way of Terry Fritz <teslalist-at-qwest-dot-net>" <Gary.Lau-at-hp-dot-com>

While stranded wire will certainly work, depending upon the operating 
frequency, AC resistance losses will be considerably higher than with the 
same gauge in a solid conductor.

Regards, Gary Lau
MA, USA

 >Original poster: "Terry Fritz" <teslalist-at-qwest-dot-net>
 >
 ><snip>
 >
 >The secondary L2 will be 171 turns, 12 inches dia., of #20 stranded hookup
 >wire.  The diameter of this plastic coated wire is 1.79mm so it will be
 >12.04 inches long for an inductance of 6.05mH.  This can be easily spliced
 >and such incase adjustments are needed.

Prev by Date: Re: Small toroids
Next by Date: Re: Z-Machine Sparkage- Try this at home!!
Prev by thread: Re: Magnifier conversion
Next by thread: Re: Magnifier conversion
Index(es):
- Date
- Thread