Re: Magnifier conversion

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Terry Fritz" <teslalist-at-qwest-dot-net>

Hi All,

Lots going on this weekend but I did manage to build the primary coil.

http://hot-streamer-dot-com/temp/NewMag/0420-01.jpg

It's 16 inches in diameter and 11+ turns.  Just 1/2 inch Lexan with a bunch 
of serious cutting ;-)  So I have the primary and secondary all done now.

http://hot-streamer-dot-com/temp/NewMag/0420-02.jpg

I left room for a ton of poly sheeting incase primary to secondary arcing 
is a problem.

Still have not done a thing on the C2 cap but I have all the stuff so just 
a matter of building that and it will be pretty much done.  Maybe some 
corona rings here and there too...

Cheers,

	Terry