Re: PlasmaSonic SSTC Final Parts List release

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Steven Ward by way of Terry Fritz <teslalist-at-qwest-dot-net>" <srward16-at-hotmail-dot-com>

I think the IRFP460 was put in there so the total price isnt so daunting 
(sp?)!!!  Luckily i got my 48N50s for only $55 for 10 of them.  I think 
they are usually $30-40 a pop from any other place than ebay.


>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: Re: PlasmaSonic SSTC Final Parts List release
>Date: Thu, 31 Jul 2003 21:26:02 -0600
>
>Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>" 
><dhmccauley-at-spacecatlighting-dot-com>
>
>The IRFP460 is just one option for FETs on the board.  The board not only
>accepts the SOT-227 type package, but can also accept many other different
>type FET packages by
>soldering them onto the SOT-227 pad.  The IRFP460 part was included in the
>parts list only as example.
>
>Dan
>
>
>
> > Dan,
> >
> > I am puzzeled by the IRFP460P-ND, being in a TO-247 package, which
> > doesn`t fit into the board, and cannot handle a lot of current either.
> > I thought you had already argued very well for a SOT-227B packed part.
> >
> > Cheers, Finn Hammer
> >
> > Tesla list skriver:
> >  >
> >  > Original poster: "by way of Terry Fritz <teslalist-at-qwest-dot-net>"
> > <dhmccauley-at-spacecatlighting-dot-com>
> >  >
> >  > After testing the PlasmaSonic SSTC, I have finalized the parts list and
> >  > updated the webpage accordingly.
> >  >
> >  > All new information including corrections for the board are here:
> >  >
> >  > http://www.spacecatlighting-dot-com/teslacoil15.htm
> >  >
> >  > Enjoy!
> >  >
> >  > The Captain
> >
> >
> >
> >