Re: coil at school?

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: robert & june heidlebaugh <rheidlebaugh-at-desertgate-dot-com> 

Kenin... I have the same problem. I place coils to be tested in a room with
NO computers on a conductive pad  on the floor. I use a good line filter and
I have had no problems. I would never try to test any TC in a room with a
computer or any other electronic equipment
    Robert   H--


 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > Date: Tue, 02 Dec 2003 17:16:52 -0700
 > To: tesla-at-pupman-dot-com
 > Subject: coil at school?
 > Resent-From: tesla-at-pupman-dot-com
 > Resent-Date: Tue, 2 Dec 2003 17:23:14 -0700
 >
 > Original poster: "K Wilson" <teslamap-at-hotmail-dot-com>
 >
 > After making a new secondary coil on the lathe at school, all the
 > professors want me to bring the coil in for a demonstration. But I remember
 > something about coils causing voltage spikes in the mains wiring. I just
 > unplug everything in the house when I run it at home. The tech building has
 > 300 computers that I dont want to have to pay for!
 > How can I run the coil at school (or other building)? I have a filter in
 > the mains input, would that be good enough? Keep the RF ground far from the
 > building ground?
 >
 > Thanks,
 > Kevin Wilson
 > teslamap-at-hotmail-dot-com
 >
 > _
 >
 >