Re: Spheres on toroids

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 

Thanks Thomas for your description of the parameters.  My copy of the
program has r and z axis and the english <-> metrix conversion didn't seem
to work for this part of the program (it would be nice to have a cm - inches
button that one sets at the beginning and then input in the units that they
are use to).  I noticed that the E field plot did not seem to be a function
of the applied voltage but instead seem to be normalized for the breakout
voltage,... so I just left the .v set to 1.  Now if I could figure out how
to print the field plot.

It's a great program and others on the list should use it.  Your tutorial
will be helpful to many.

Gerry R.


 > Original poster: Thomas <tom-at-pwrcom-dot-com.au>
 >
 >
 > There are three types of objects you can define, lines (L), circles (C),
and
 > voltages applied to the objects (.v)
 >
 > Voltages are defined as follows:
 > .v <name> <voltage>
 > where
 > <name> is a descriptive name string used to define voltages on line and
 > circle objects
 > <voltage> is the voltage in volts