Re: Spheres on toroids

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Antonio Carlos M. de Queiroz" <acmq-at-compuland-dot-com.br> 

Tesla list wrote:
 >
 > Original poster: Thomas <tom-at-pwrcom-dot-com.au>

 > Ok here's what I've worked out,
 >...
 > <name> is a description (no spaces) not  sure of max length
12 characters.
 >...

There are also elliptic curves:
E<name> <volt> <no_rings> <x> <y> <rvertical> <rhorizontal> <sta> <enda>
The start and end angles are as in the circular curves, but refer to
flattened or stretched circles. 0, 90, 180, 270, and 360 degrees
produce the expected results, but values between these correspond to
what would happen in a deformed circle.

 > I sometimes set the voltage to 1V just for comparisons between different
 > geometries of top load.

If you doesn't say anything, the program assumes 1 V.

Antonio Carlos M. de Queiroz