Re: Primary flat wire????

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Dave Leddon by way of Terry Fritz <teslalist-at-qwest-dot-net>" <leddon-at-attbi-dot-com>

Dan

Parawire http://www.parawire-dot-com advertises copper strip from .008" to
.125" thick in any width.  If you can affort it, I would use something
thicker than weatherstripping, maybe something on the order of 0.0625".

Dave

At 05:18 PM 1/10/03 -0700, you wrote:
 >Original poster: "Mccauley, Daniel H by way of Terry Fritz
<teslalist-at-qwest-dot-net>" <daniel.h.mccauley-at-lmco-dot-com>
 >
 >
 >To save some space, I'd like to build a primary using flat ribbon type
 >wire???
 >
 >I think both Ed Wingate and Terry Blake had used bronze or copper
 >weatherstripping.
 >Anyone have a cheap source for this stuff.  So far, the places I looked at
 >were sell 10mils, 1" wide
 >stripping in 100 foot rolls for $200.00 or so.
 >
 >Dan
 >