Electric Waterfall Pictures

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Harold Weiss by way of Terry Fritz <teslalist-at-qwest-dot-net>" <hweiss-at-new.rr-dot-com>

Hi All,

Here's my waterfall pictures:

http://hot-streamer-dot-com/temp/water1.jpg

http://hot-streamer-dot-com/temp/water2.jpg

http://hot-streamer-dot-com/temp/water3.jpg

When running a waterfall it will take retunning the coil a bit, due to the
added load.  The lead to the top electrode should come in as vertical as
possible.  If not, as the pictures show, you won't get much on one side.
Not all the streamers go down, so don't get too close.  It is a GREAT bug
zapper!

Dimensions/Specs are:

Base: 1" canvas phenolic 14.5" dia.
Bottom Electrode: .125" aluminium 14" dia.
Pedestal:
                Caps: 1" canvas phenolic 6" dia.
                Tube: 4.250" OD .125" wall acyrlic
                Filling: blue acrylic chunks
                Hight: 12"
Insulating Disk: .500" plate glass w ground edges 12" dia.
Top Electrode: .125" aluminium 8" dia.
Terminal: 1.250" brass drawer pull.

May your streamers be long and plentiful!

David E Weiss