Re: tank circuit

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: robert & june heidlebaugh <rheidlebaugh-at-desertgate-dot-com> 

Dan.   The conection  wires between the primary and your capacitor/sparkgap
should be able to deliver all your current. All other wires can be small and
even long.  The use of small welding cable , coax shield in vinal tubing, 0r
any other stout conductor is good. I use the core of RG8 coax inside vinal
tubing with no shield. Silicon greese allowes you to do that.
    Robert  H
-- 


 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > Date: Mon, 17 Nov 2003 11:27:59 -0700
 > To: tesla-at-pupman-dot-com
 > Subject: RE: tank circuit
 > Resent-From: tesla-at-pupman-dot-com
 > Resent-Date: Mon, 17 Nov 2003 11:35:56 -0700
 >
 > Original poster: "Mccauley, Daniel H" <daniel.h.mccauley-at-lmco-dot-com>
 >
 >
 >
 > 1/4 inch tubing is perfect for coils up to a couple of kilowatts.  If
 > you are using something smaller (less than
 > a kilowatt), you can use smaller tubing as well.
 >
 > Buy the flexible refrigeration tubing and don't undwind it.  Once you
 > build your coilform, lay the coil of tubing
 > on top and start forming to the pancake coil form.
 >
 > Dan
 >
 >
 >> Would it work ok just to use 1/4 inch coppet tubing for the
 >> tank circuit
 >> wiring. provided there is enough distance between wires to
 >> stop them arcing
 >> over?
 >>
 >>
 >>
 >>
 >>
 >
 >