[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Filament help!

To: tesla-at-pupman-dot-com
Subject: Filament help!
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Sat, 25 Oct 2003 21:03:18 -0600
Resent-Date: Sat, 25 Oct 2003 21:06:54 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <PDYkAB.A.nfF.Hpzm_-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Jim Mitchell" <Wrenchead-at-starband-dot-net> 

I'm using a 4-125A in my VTTC, and I cant find a filament supply!  I was
thinking of using a PC PSU but they have too many wires and I don't know
which ones to cross for power on, and which to load to keep regulation
proper.  The 4-125A needs 5v at 6.5A for the filament.  Also, any idea if
thise tube is better than the 813? I have both and am wondering which I
should use.

Prev by Date: Re: Sparking off the secondary problem (more info)
Next by Date: Re: Source for Aluminum Spheres (up to 12" threaded)
Prev by thread: Re: 6146A Vacuum Tube Tesla Coil Questions
Next by thread: Re: Filament help!
Index(es):
- Date
- Thread