[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

MiniSSTC project

To: tesla-at-pupman-dot-com
Subject: MiniSSTC project
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Fri, 13 Aug 2004 12:05:20 -0600
Resent-Date: Fri, 13 Aug 2004 12:08:56 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <S0RAyD.A.FgE.1OQHBB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Liviu Vasiliu" <teslina-at-yahoo-dot-com> 

Hi list
With the generous help from the 4.hv-dot-org board i built
a little antenna based SSTC driver (it is basically
the Steve Ward design)runing a half bridge, for a
little 11 cm/ 28 cm, 960 turns secondary.
I run it from 120 vac input from my variac. Steve
suggested that I can go up to 170 vac, and geting up
to 12 inches. For now i am very pleased with these 8
inches streamers.

Pics are here:

http://www.geocities-dot-com/teslina/minisstcpage.html

Enjoy

vasil

Prev by Date: Re: Dear Rich REGARDING TITANIUM or ALUMINUM as an electrode
Next by Date: RE: My SSTC!
Prev by thread: RE: My SSTC!
Next by thread: RE: MiniSSTC project
Index(es):
- Date
- Thread