RE: MiniSSTC project

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Liviu Vasiliu" <teslina-at-yahoo-dot-com> 

My mistake, thanx Steve.






--- Tesla list <tesla-at-pupman-dot-com> wrote:

 > Original poster: "Steven Ward"
 > <srward16-at-hotmail-dot-com>
 >
 > Vasil,
 >
 > One clarification on some "advice" i gave you.  The
 > max AC input should be
 > no more than 140VAC (200VDC peak).  You can NEVER go
 > beyond that
 > point.  But when i mentioned 170V i meant 170vdc
 > (120VAC).  Sorry for the
 > mix up.
 >
 > Anyway, great work for such limited supplies and
 > equipment!
 >
 > Steve
 >
 >
 > >From: "Tesla list" <tesla-at-pupman-dot-com>
 > >To: tesla-at-pupman-dot-com
 > >Subject: MiniSSTC project
 > >Date: Fri, 13 Aug 2004 12:05:20 -0600
 > >
 > >Original poster: "Liviu Vasiliu"
 > <teslina-at-yahoo-dot-com>
 > >
 > >Hi list
 > >With the generous help from the 4.hv-dot-org board i
 > built
 > >a little antenna based SSTC driver (it is basically
 > >the Steve Ward design)runing a half bridge, for a
 > >little 11 cm/ 28 cm, 960 turns secondary.
 > >I run it from 120 vac input from my variac. Steve
 > suggested that I can go up to 170 vac, and geting up
 > to 12 inches. For now i am very pleased with these 8
 > inches streamers.
 >
 > Pics are here:
 >
 > http://www.geocities-dot-com/teslina/minisstcpage.html
 >
 > Enjoy
 >
 > vasil
 >
 >
 >
 >
 >