[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: LOTS OF H.V. STUFF !!!
Original poster: "teri mckenney" <mck-at-ezy-dot-net>
Hey Bart,
Cutting and pasting a link is much more "consumer friendly".
Bill Mck.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, August 21, 2004 10:07 PM
Subject: Re: LOTS OF H.V. STUFF !!!
> Original poster: "BART" <BAPLATING-at-TDS-dot-net>
>
> HI ALL,
> SORRY, TRY THESE THEN CHECK OUT SELLERS OTHER ITEMS.
>
> Item number: 7917043428 AND Item number: 3835067335.
>
> CHEERS,
>
> BART A.
>
> ----- Original Message -----
> From: "Tesla list" <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Saturday, August 21, 2004 7:52 PM
> Subject: Re: LOTS OF H.V. STUFF !!!
>
>
> > Original poster: DRIEBEN-at-midsouth.rr-dot-com
> >
> > Hi Bart,
> >
> > I'm afraid that we'll need more digits than "BA429" and "BA460"
> > to find your listed ebay items as the ebay item list numbers are
> > composed of around a dozen digits.
> >
> > David Rieben
> >
> > ----- Original Message -----
> > From: Tesla list <tesla-at-pupman-dot-com>
> > Date: Saturday, August 21, 2004 8:56 am
> > Subject: LOTS OF H.V. STUFF !!!
> >
> > > Original poster: "BART" <BAPLATING-at-TDS-dot-net>
> > >
> > > HI ALL,
> > >
> > > Check out this stuff I have on e-bay.
> > > I would really like too see these items used for tesla use!!!
> > > E-bay I.D : BA429 AND BA460
> > >
> > > CHEERS,
> > > BART A.
> > >
> > >
> > > ---- Original Message -----
> > > From: "Tesla list" <tesla-at-pupman-dot-com>
> > > To: <tesla-at-pupman-dot-com>
> > > Sent: Wednesday, August 18, 2004 2:21 PM
> > > Subject: Re: Diode Strings
> > >
> > >
> > > > Original poster: "David Rieben" <drieben-at-midsouth.rr-dot-com>
> > > >
> > > > Rick,
> > > >
> > > > You may wish to consider the diode "sticks" removed from an
> > > > x-ray HVDC generator (x-ray transformer). These diode "sticks"
> > > > are amazingly small for their mammoth voltage ratings.
> > > > (app. 1" wide x 6" long x 1/16" thick G-10 PCB with usually
> > > > 15 to 25 individual diodes soldered in a series configuration).
> > > > There are NO balancing resistors invovled here
> > > > either. They are generally rated at 150 kV pk -at- appr. 1 amp.
> > > > Of course they are designed to operate at or near their max
> > > > ratings submerged in oil and usually at a low duty cycle.
> > > > However they can easily withstand the relatively "low" voltage
> > > > from a 14.4 kV pig without the need for oil-submersion and the
> > > > current rating may be the only issue for a really high powered
> > > > coil.
> > > >
> > > > David Rieben
> >
> >
> >
>
>