[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Leaky Pig
- To: tesla@xxxxxxxxxx
- Subject: Re: Leaky Pig
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 20 Dec 2004 19:27:56 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Mon, 20 Dec 2004 19:31:09 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <zWUwS.A.hlF.sr4xBB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: CTCDW@xxxxxxx
I have the same problem!!!!!!! I haven't solved it, although I have tried
several things. The only thing that has stopped it, although is by no means
a permanent solution is wedging the relief valve part way open to keep
presssure from building up. I have concerns about moisture getting in
though. I even removed the insulator and packed it with silicone. No Luck.
I drained enough oil out to be below insulator level. That didn't help. the
wires are covered in a woven insulation, and it's wicking up through it. Oh
well. If anyone DOES have a solution, please pass it on!
Chris W