[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: High Reliability - DRSSTC II - Proven
- To: tesla@xxxxxxxxxx
- Subject: RE: High Reliability - DRSSTC II - Proven
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 22 Dec 2004 11:55:30 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Wed, 22 Dec 2004 11:56:57 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <_TNOVD.A.lv.1NcyBB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Steve Conner" <steve.conner@xxxxxxxxxxx>
>I have put in a total of 100 hours of cumulative runtime on this sytem
>at full power with zero failures.
Hi Dan,
That's good news. Were you using an overcurrent protection circuit (since I
remember you put the option for one on your board) or was the effect of the
thinner primary wire enough to keep the current safe?
>the coil was left running at 100%
>power... for a CONTINUOUS 5 hours
8-o
Steve C.