RE: Mini-coil wall ground

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Tom Luttrell PWRCOM" <tom-at-pwrcom-dot-com.au> 

My minicoil (6kV 30mA NST) used a counterpoise and the mains earth.
I now I use it with my main RF earth, because whenever I turned it on it
used to turn my $$ Yamaha home theatre amplifier off. This was despite
having two rf filters (one on the HT set up and one on the minicoil).

It was a little worrying.

I agree with your comments regarding JavaTC, it's fantastic!

Tom.

 > Original poster: John <fireba8104-at-yahoo-dot-com>
 >
 > Hello all,
 > I need a little, or maybe alot, of input on this.I wish to
 > know of any
 > problems large or small with using the house ground for a 230 watt
 > mini-coil. The major problem I'm concerned about is destruction to
 > computers,T.V., etc. that share the same ground.
 > Coil specs
 > OBIT
 > 10 kv
 > 23ma
 >
 > ~ 505kHz calculated and measured.-JavaTC kicks -at-$$
 > Thanks,
 > John