Ground rod made easy

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Randy & Lori" <rburney6-at-comcast-dot-net> 

I just thought I would share how I didn’t have to hammer my ground rod.  I 
took a ¾ “ copper pipe and attached it to the water hose with some leftover 
tape from building the torrid.  Turn on the water, and the thing just 
drills itself as far down as you want to go.  About ten minutes before 
running the coil I fill the tube with water.  This way I have a lot of 
surface area, and water at the bottom of my rod!

Randy