[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Waveform Generators - Any interest in BULK board / enclosure purchase ? ? ?
Original poster: "Nick Andrews" <nicothefabulous-at-hotmail-dot-com>
I would be interested as well.
Nick Andrews
>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: tesla-at-pupman-dot-com
>Subject: RE: Waveform Generators - Any interest in BULK board /
>enclosure purchase ? ? ?
>Date: Tue, 04 May 2004 07:38:46 -0600
>
>Original poster: "Cody Carse" <cac619-at-earthlink-dot-net>
>
>You can definitely count me in for one.
>
>-----Original Message-----
>From: Tesla list [mailto:tesla-at-pupman-dot-com]
>Sent: Monday, May 03, 2004 10:18 AM
>To: tesla-at-pupman-dot-com
>Subject: Re: Waveform Generators - Any interest in BULK board / enclosure
>purchase ? ? ?
>
>Original poster: "Eastern Voltage Research Corporation"
><dhmccauley-at-easternvoltageresearch-dot-com>
>
>
>If I did it, the PCB would probably be about $20.00 and the custom front
>panel would be about $15.
>
>Dan
>
>
> > As long as its no ridiculously expensive, I'd want one!
> >
> > ---Eric
> > ----- Original Message -----
> > From: "Tesla list" <tesla-at-pupman-dot-com>
> > To: <tesla-at-pupman-dot-com>
> > Sent: Saturday, May 01, 2004 5:12 PM
> > Subject: Waveform Generators - Any interest in BULK board / enclosure
> > purchase ? ? ?
> >
> >
> > > Original poster: "Eastern Voltage Research Corporation"
> > <dhmccauley-at-easternvoltageresearch-dot-com>
> > >
> > > I've been thinking about designing a high quality waveform generator
>for
> > > sometime now and wanted to find out
> > > if there is any interest on the group for possibly a bulk board /
>front
> > > panel purchase.
> > >
> > > Basically, I would propose designing a PCB board and also a customized
> > front
> > > panel (to fit a nice off-the-shelf Hammond enclosure box) and sell
>them
> > > together.
> > >
> > > The function generator would basically have:
> > > Sine Wave
> > > Square Wave
> > > Triangle Wave
> > > Pulse (adj Duty)
> > > Sawtooth Wave
> > >
> > > Initially 0-5VDC with adjustable OFFSET output with the possibility of
> > going
> > > with a power stage for high voltage output.
> > > It would also be PLL synthesized with a crystal for high accuracy and
> > > possibly an LCD PIC interface.
> > >
> > > I haven't made any decisions on whether i'll do this or not, but if
>there
> > is
> > > enough interest, i may consider pursuing it.
> > >
> > > Thanks
> > > Dan
> > >
> > >
> > >
> >
> >
> >