[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
SSTC hits 66"
Original poster: "Eastern Voltage Research Corporation" <dhmccauley-at-easternvoltageresearch-dot-com>
I just finished my new PSSTC (Pulsed SSTC) and have hit 66" so far with
minimal tuning and pretty shoddy primary tank wires (12 AWG).
Specifications from these photos:
DC Bus Voltage: 335VDC
Primary Capacitor: 0.11uF, 12kV MMC
Fres: 111 kHz
Pulsewidth: 250us
PRF: 100 Hz
The whole webpage describing my coil can be seen here:
http://www.easternvoltageresearch-dot-com/sstccoil05.htm
Arc photo prior to my full-bridge blowing up. (See secondary to primary arc
which initiated failure)
Distance from toroid to right wall is approximately 70 inches.
http://www.easternvoltageresearch-dot-com/images/isstc_arcs_bwtitle.jpg
Full size arc photo of BW above (color)
http://www.easternvoltageresearch-dot-com/images/isstc_arcs_fullsize01.jpg
55 inch POWER STRIKE to ceiling
http://www.easternvoltageresearch-dot-com/images/isstc_arcs05.jpg
Dan