RE: Jim mitchell's solid state tesla coil board

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Daniel Kline" <daniel_kline-at-med.unc.edu> 



 > -----Original Message-----
 > From: Tesla list [mailto:tesla-at-pupman-dot-com]
 > Sent: Monday, May 17, 2004 8:54 PM
 > To: tesla-at-pupman-dot-com
 > Subject: Re: Jim mitchell's solid state tesla coil board
 >
 >
 > Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net>
 >
 > All,
 >
 > I have written intructions.  It is posible that some of you
 > have not gotten
 > them or something.  IF so, the instructions for my board are here.
 > http://www.hot-streamer-dot-com/electrontube/temp/Self%20Resonant%
 > 20SSTC%20board%20DR.doc
 > If you need further help, you may email em privately.  Please
 > note,  when
 > you bought the board,  I explained fully that this was just
 > the driver.  I
 > can't give everyone step by step instructions via email if
 > you don't bother
 > to read the ones I've written already!

Dude!
My email wasn't directed at you...just the SSTC community in general.
I really appreciate the boards, documents, parts-lists, etc., I'm just
not as swift as I could be with solid-state is all. The request was a
general one, hoping that someone might put a guide together. No gripe
intended.
-Dan K.