[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re[2]: current output of 15 Kv, 30 mA neon xformer HALVED?
Original poster: "Mike Poulton" <mpoulton-at-mtptech-dot-com>
Tesla list Wrote:
> Original poster: Dsurfr-at-aol-dot-com
> Jack, you would have 7.5Kv at 30mA off each leg of a 15Kv 30mA neon xfrmr.
> If you had 2 xfrmrs. you could parallel the output of one leg off of each
> (in phase with each other) to get 7.5Kv at 60mA. You can't parallel the two
> legs off a single xfrmr. since they are 180 degrees out of phase.
But, you can rectify them using a pair of diodes and get 60mA DC
output.
-------------------------------------------------
Mike Poulton
MTP Technologies
mpoulton-at-mtptech-dot-com
KC0LLX (70cm AM ATV, 33cm/12cm FM ATV, Omaha, NE)