[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Coil Woes

To: tesla-at-pupman-dot-com
Subject: Re: Coil Woes
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Thu, 07 Oct 2004 18:57:43 -0600
Resent-Date: Thu, 7 Oct 2004 18:58:58 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <B5aN9C.A.nhC.pYeZBB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "BunnyKiller" <bunikllr-at-bellsouth-dot-net> 



Tesla list wrote:
SNIPPERZ...



>UHMW blocks were used to hold my primary with ABS caps. A couple of posts 
>suggested these materials may have conductive properties.  Any thoughts on 
>this?
>
>Would Nylon be a better insulator?
>
>Thanks
>JIM
Nylon has a tendency to absorb water alot more easily than UHMWPE     Id 
stick with UHMWPE    at enuf voltage everything becomes conductive   :)

Scot D

Prev by Date: Re: GeoTC and Spice netlists
Next by Date: Re: Secondary catastrophe
Prev by thread: Re: Coil Woes
Next by thread: Re: Coil Woes
Index(es):
- Date
- Thread