[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Calculating capacitance of stacked toroids . . .

To: tesla-at-pupman-dot-com
Subject: Re: Calculating capacitance of stacked toroids . . .
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Fri, 10 Sep 2004 07:01:50 -0600
Resent-Date: Fri, 10 Sep 2004 07:03:52 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <X9MNUB.A.7kG.oYaQBB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com> 



Try using 150% x C1 value --- this works assuming they are the same physical
size.  I have not measured two units together with different sizes.  Perhaps
Ed Wingate could take a measurement with his dual toroid setup.

Dr. Resonance
 >
 > Ctotal = 50% (C1+C2)
 >
 > where:  C1 = capacitance toroid 1
 >             C2 = capacitance toroid 2
 >
 > Dan

Prev by Date: Re: High Inductance Secondaries and DRSSTCs
Next by Date: RE: High Inductance Secondaries and DRSSTCs
Prev by thread: Re: Calculating capacitance of stacked toroids . . .
Next by thread: Re: Calculating capacitance of stacked toroids . . .
Index(es):
- Date
- Thread