[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Ballasting a Pole Pig

To: tesla@xxxxxxxxxx
Subject: Ballasting a Pole Pig
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Mon, 19 Dec 2005 14:45:41 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Mon, 19 Dec 2005 14:42:28 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <Ko4RKuwk8XB.A.sHF.ElypDB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "C. Sibley" <a37chevy@xxxxxxxxx>

I'm considering making the move to a Pole Pig since
I'm having a hard time finding anything larger than a
60 mA NST.  I have a old stick welder that I'm
considering using as a ballast, but am not 100% sure
how I should go about hooking it up.  Do I just use
the power inputs and run it in series with the pig?
Do I need to terminate the "welding" output?  Does it
matter what setting the welding output power is set
to?

Thanks,

Curt.

Prev by Date: Re: NST ground, was capacitor help
Next by Date: Re: A LUA file for BELA (a help to build electrostatic model of TC)
Previous by thread: RE: NST ground, was capacitor help
Next by thread: Re: Ballasting a Pole Pig
Index(es):
- Date
- Thread