[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Possible salt-water cap vessel.
- To: tesla@xxxxxxxxxx
- Subject: Re: Possible salt-water cap vessel.
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sat, 12 Feb 2005 12:22:03 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sat, 12 Feb 2005 12:22:49 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <RI77hB.A.AXF.IelDCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Dan Kunkel <dankunkel@xxxxxxxxx>
CajunCoiler,
as dielectrics, cerramics have a very desirable K value and good
voltage breakdown characteristics, but exhibit a very high loss in RF
circuits. i would definately avoid. not only that, but you'll need
quite a few of them to reach the desired capacitance.
if you HAVE to use saltwater caps, glass 12oz beer bottles or 750mL
vodka bottles work well enough.
Dan
On Fri, 11 Feb 2005 17:57:19 -0700, Tesla list <tesla@xxxxxxxxxx> wrote:
> Original poster: "Christopher 'CajunCoiler' Mayeux" <cajuncoiler@xxxxxxx>
>
> I was just pondering the possibility of using the 6.37oz
> Old Spice bottles for a saltwater cap with a ceramic
> dielectric. Has anyone tried this one yet?
> --
> C.L. Mayeux, MsEE
> Owner, MSB Data Systems
> cajuncoiler@xxxxxxxxxxxxxxxxxx
> http://cajuncoiler.msbdatasystems.com
>
>