[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Advice on Primary
- To: tesla@xxxxxxxxxx
- Subject: Re: Advice on Primary
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Fri, 25 Feb 2005 08:11:10 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Fri, 25 Feb 2005 08:12:00 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <s6rYsC.A.-KF._A0HCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>
That's what I did, though it's hard to see in this
photo. I used a tubing bender and got a nice smooth
large radius bend.
http://www.hot-streamer.com/adam/primary.htm
Adam
--- Tesla list <tesla@xxxxxxxxxx> wrote:
> Original poster: "david baehr" <dfb25@xxxxxxxxxxx>
>
>
> That looks VERY NICE !! The one thing I like to do
> is make a smooth bend
> of the tubing and take it right down through the
> base, that way I can make
> the connections below ,....no sharp edges close to
> the secondary...........