RE: Combining mots

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Dave Halliday" <dh@xxxxxxxxxxxxxx>

Input power would be limited to that single primary. The watts output
would stay the same regardless of how many secondaries you stacked.

The reason for stacking four or six is to gain both amps and volts (ie:
watts)



> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx]
> Sent: Monday, April 03, 2006 10:16 PM
> To: tesla@xxxxxxxxxx
> Subject: Combining mots
>
>
> Original poster: Allan & Sandra <allan_sandra@xxxxxxxxx>
>
> Hi List
> Has anyone thought of taking apart 2 or more mots of the same size
> combining the 2 E cores leaving one primary winding and have 2 maybe 3
> Secondaries wired in series making one big mot adding as many shunts
> as possible.Then weld the 2 E cores together
> Would this work? it would be nice to have a 4 or 6 Pack mot stack
> combined into 2 tranies.
> I have had good success taking them apart using a cutting disk then
> taping the center laminations out first to free them from the
> windings undamaged so i could
> reuse the wire.
> Just an idea any feed back would be appreciated
> Thanks in advance
> Al Scott
> Hamilton , Ontario , Canada
>
>
>
>