Re: Re rotary gap design

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: FIFTYGUY@xxxxxxx 

In a message dated 4/24/06 2:33:58 PM Eastern Daylight Time, 
tesla@xxxxxxxxxx writes:

>I wonder if you couldnt get a machinist to either put two small groves
>in a tungsten electrode (or in a sheath heat shrunk around the
>electrode) and then secure the electrode to the disk with circle clips
>on both sides.

    That sounds like a good idea, especially since it's such a 
simple solution!

-Phil LaBudde