[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MMC bleed resistors

To: tesla@xxxxxxxxxx
Subject: Re: MMC bleed resistors
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Wed, 18 Jan 2006 04:56:51 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Wed, 18 Jan 2006 04:50:32 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <oFQJt9lcEfK.A.rQE.IuizDB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>

10 Mohm 1/2 watt is what most use. However, leads aren't long enoughfor the 0.15uf so I put two 10Mohm resisters is series.


Gerry R

Original poster: "Gates" <ryker@xxxxxxx>

What value of bleed resistors can I use for my mmc setup?
I have 2000V CDE caps of .15mF
Thanks Gang
Gates

Prev by Date: Re: Cold Cathode Transformer
Next by Date: Re: ballast core sources
Previous by thread: RE: MMC bleed resistors
Next by thread: RE: MMC bleed resistors
Index(es):
- Date
- Thread