[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
spark gap
Original poster: Timjroche@xxxxxxx
I'm running:
12kV 120mA NST
.03 uF 45kV maxwell tank cap
12 T .25" tube .25" spacing primary
4.343" OD 28awg 17" lng secondary
maj. dia 17" min dia 4" toriod
What is the best place to start a static gap? I have . 5" solid Cu
(12 pcs. 4" long), .5" tube, 7/8" tube, and 1.125" tube...is hollow
better? bigger dia?
What about length? my 7/8" (6 pcs. 6" long) better than .5" 3"long?
can you have to many gaps? i.e. total gap=.5", 2 tubes?, 6 tubes?, 12 tubes?
thanxs
Tim