RE: Iron transformer positioning under the primary experiment

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Garry Freemyer" <garryfre@xxxxxxxxxxx>

Hmm, I wonder if he means that parts of the filter might act as antennas
that pick up high frequency.

It would be a rather conclusive experiment to scope the outputs of the NST
and see if moving the filter has any effect.

If it proves the Doctor right, it would be a good case for possibly
enclosing the filter in some sort of grounded, gel or wax filled metal
container and see if that has any fixes. Any coil that I might have that has
more than 3 parts to remember to take along would be a nightmare, of me
forgetting parts at home and at destination.


-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Monday, July 10, 2006 12:16 PM
To: tesla@xxxxxxxxxx
Subject: RE: Iron transformer positioning under the primary experiment

Original poster: "Lau, Gary" <Gary.Lau@xxxxxx>

Hi Dr:

I'm curious why you suggest that a Terry filter is of no value if it's
under the primary coil.  If the NST(s) were located remotely from the
coil assembly, then I'd agree that locating the filter under the primary
is bad, but only because it's distant from the NST's.  But if the NST is
also close to the primary, I don't see how the filter's proximity to the
primary compromises its effectiveness.  Or were you just cautioning not
to locate the filter far from the NST's?

Regards, Gary Lau
MA, USA


 > Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>
 >
 >
 > It's not only the metal proximity that should be considered.  Any
 > closed turns in a transformer coil that are under or near the primary
 > coil will pick up spurious spikes and may damage the transformer or
 > induce these nasty very low microsecond spikes into the 60 Hertz
 > power line.  Also, directly under the primary, a Terry filter really
 > is of no value.
 >
 > It is easy and cheap to simply enclose the power transformer and
 > Terry filter in a suitable enclosure 5-6 feet away from the coil.  No
 > need to take chances.  It is simply poor engineering practice.
 >
 > Dr. Resonance