From: "Tesla list" <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: RE: GE Potential Transformer 200:1(24KV) Ratio and Enclosed
Variac For Sale
Date: Sat, 03 Jun 2006 08:55:49 -0600
Original poster: <dhmccauley@xxxxxxxxxxxxxxxxxxxxxxxxxx>
I have datasheets for these transformers located on my website under the
Amateur Design Resource section if anyone is interested . . .
http://www.easternvoltageresearch.com
Dan
These larger GE PTs can actually be run on 240V. They
have two separate 120V windings just like a pole pig,
which can be arranged in series for 240V if desired.
I had the 130:1 version of this transformer a year or
so ago, but replaced it with a pig. Ever since, I've
longed for it back. A 3kVA PT is just the thing for
teslathons.
I'd love to get this one and am only a few miles from
it. Just gotta see what the wife says is left in my
hobby fund. It seems to drop inexplicably every time
I want something ;-)
Regads,
Aaron
--- Tesla list <tesla@xxxxxxxxxx> wrote:
> Original poster: "David Rieben"
> <drieben@xxxxxxxxxxxxxxx>
>
> Jim, all,
>
> Yes, I thought that this was a neat transformer as
> well.
> You definitely gain an advantage by increased
> voltage
> per E = .5CV(2). Of course this also requires
> hardier
> voltage rating of the capacitor(s). The one
> disadvantage
> that I see, besides the shipping/freight charges of
> this
> beast, is the 120 volt input, as you would have to
> double
> the input current over what you would need with a
> 240
> volt input to get the same current on the HV output.
> A
> standard 20 amp 120 volt circuit couldn't handle the
> cur-
> rent draw.
>
> David Rieben
>
>
> ----- Original Message ----- From: "Tesla list"
> <tesla@xxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Friday, June 02, 2006 1:38 AM
> Subject: RE: GE Potential Transformer 200:1(24KV)
> Ratio and Enclosed
> Variac For Sale
>
>
> >Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>
> >
> >Wow, that is ~34KV peak. It would require some cap
> tweaking my stuff. Nice
> >transformer, but LA is a Long way from Seattle!
> >
> >Cheers Jim mora
> >
> >Besides I'm running out of thoughtful friendly
> neighbors. My backyard to the
> >unskiiled eye, with connectors soow cord with
> Mmennekes plugs and receptcals
> >, racks, is a junk collection! Cool Transformers I
> don't have a potential
> >though. I have 12"x 8x 1/8 arsg that would be good
> but the caps would need
> >to HV^ C smallish for higher break rates since the
> volts are up and "I" is
> >down. I'll go model the break rates. Viewers
> thoughts?
> >
> >
> >-----Original Message-----
> >From: Tesla list [mailto:tesla@xxxxxxxxxx]
> >Sent: Wednesday, May 31, 2006 3:15 PM
> >To: tesla@xxxxxxxxxx
> >Subject: RE: GE Potential Transformer 200:1(24KV)
> Ratio and Enclosed Variac
> >For Sale
> >
> >Original poster: "Block Warden"
> <blockwarden@xxxxxxxxx>
> >
> >I forgot to mention that the potential transformer
> is 120V, not 240V
> >like a standard pole pig.
> >
> >-----Original Message-----
> >From: Tesla list [mailto:tesla@xxxxxxxxxx]
> >Sent: Wednesday, May 31, 2006 1:53 PM
> >To: tesla@xxxxxxxxxx
> >Subject: GE Potential Transformer 200:1(24KV) Ratio
> and Enclosed Variac
> >For Sale
> >
> >
> >Original poster: "Block Warden"
> <blockwarden@xxxxxxxxx>
> >
> >I have a 200:1 GE potential transformer that I
> never got around to
> >using and it is time for it to find a new home.
> >
> >Here's the specs:
> >
> >Model: JVT-150
> >Primary Voltage: 24,000
> >Ratio: 120/200:1
> >BIL Rating: 150KV
> >Thermal Rating @30C: 3.0 kVA
> >
> >I have the factory wiring booklet, testing tags and
> some additional
> >info I got from GE that goes with it.
> >
> >To my knowledge this transformer has never been
> hooked up other than
> >testing. Get yourself an inductive reactor to limit
> the current and
> >you have one heck of a coil power supply!
> >
> >This unit weighs a little over 300lbs and is
> mounted on a wheeled
> >dolly. I prefer not to ship it because I would have
> to drive into
> >Seattle to drop it off at the freight shipper.
> >
> >Asking price: $350.00 but I am willing to entertain
> any reasonable
> >offers.
> >
> >The Variac is a 120V 20A Powerstat. Minor dings and
> scratches from
> >use, but works great. I used to use it with my 8"
> coil and two 15/60
> >neon transformers.
> >
> >Asking Price: $100.00 or reasonable offer.
> >
> >Enjoy,
>
>
>