Re: What do I do ?

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>

Hi Gerry,

I'll try the twisted pair. If I manage to pull out the 8.5" coil for 
the 4th, I'll make this change and see if it helps. The RG8 is a good 
idea here for moderate to low power coils.

Take care,
Bart

Tesla list wrote:

> Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
>
> Hi Bart,
>
> I think a twisted pair would be a better solution.  Maybe we ought 
> to use RG8 coax :o))  I did improve my measurements by reducing the 
> current loops but then again, I had some pretty large loops to begin with.
>
> Gerry R.
>
>
> > Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>
> >
> > Hi Gerry,
> >
> > Regarding the H fields on amp meters: A couple years ago I rewired 
> > my control cabinet and routed the high current lines to and from 
> > the amp together, but this made no difference. They are routed side 
> > by side. Maybe a twisted-pair solution is necessary to reduce the H 
> > field influence?
> >
> > Take care,
> > Bart