Re: discharge sphere?

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Thomas Coyle" <zxcasd@xxxxxxxxx>

Sorry, he IS showing an 8" one with stand - his main description was just poor.

<http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7616971636>http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7616971636


On 5/6/06, Thomas Coyle <<mailto:zxcasd@xxxxxxxxx>zxcasd@xxxxxxxxx> wrote:
There's a gentleman on Ebay that sells them in various sizes pre-done 
with insulated handles or stands and long ground cable for relatively 
cheap. I've bought a few from him and they're good quality, but they 
are quite easy to dent.

Here's one: 
<http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7614867472>http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7614867472 


He isn't currently showing any of his larger ones - I've bought some 
6" and 8" units from him, both handheld and with tripods.

On 5/6/06, Tesla list <<mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx> wrote:
Original poster: Vardan <<mailto:vardan01@xxxxxxxxxxxxxxxxxxxxxxx> 
vardan01@xxxxxxxxxxxxxxxxxxxxxxx >
Hi,
Sure!  Those stainless steel gazing balls are fine.

<http://hot-streamer.com/temp/Old2001Files/2001-04/Orb.jpg>http://hot-streamer.com/temp/Old2001Files/2001-04/Orb.jpg
The metal is roughly 1/16 inch thick so they are pretty light.  The
steel is very hard so they don't dent easily.  Not as perfectly
shaped electrostatically as a toroid, but they are cheap and easy
"nice" terminals.  They are pretty scratch resistance and can be
wiped clean easily.  The surface is mirror polished with small
distortions and where the two halves were welded but they polish all
that out in a final step so you don't notice.
I used to get them here:

<http://www.waterscapesweb.com/orbs.html>http://www.waterscapesweb.com/orbs.html 

But the link is dead now.  But they are common if you search
around.  Be careful of the price since the fancy home center stores
have a high markup on them.
Cheers,
        Terry

At 01:58 PM 5/6/2006, you wrote:
>Would It be possible for the discharge sphere to be a gazing ball
>and if so what is the thickness of the metal.
>
>Cheers,
>Kyle
>
>