parts and medium size coil design data

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>


If anyone is constructing a medium to large size coil I have a few 
extra mesh type toroids.  These are solidly constructed and painted 
flat black with conductive paint over the 1/2 x 1/2 inch turkey mesh 
on a plywood form.  The larger one uses styro with plywood 
base.  They equal the performance of spun toroids at less than 1/2 
the price.  We can also make custom sizes to any size required.  Our 
Big Bruiser uses a 10 ft. dia x 60 inch cross section wire mesh 
toroid to produce 30 ft. long sparks at 30 kVA.

1 pc  --  42 x 12 inches

1 pc -- 30 x 8 inches

We also have 350 pcs of the CDE MMC caps, 0.15 uF 2 kV, in stock.

If anyone is moving up to a medium size coil, ie, 3-4 ft spark 
length, I have a design I will share via email.  It uses a 4 inch ID 
PVC form, .04 uF MMC type cap, 20 x 5" toroid, and async 1725 rpm  6 
electrode 10 inch dia. RSG.  Coil sec wire is 24 AWG 200 degree C. 
but regular magnet wire could be substituted if if contains no nicks 
or scratches.

Contact me off-list for data on any of the above.

Dr. Resonance