[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Continuously variable primary

To: tesla@xxxxxxxxxx
Subject: Re: Continuously variable primary
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Sat, 27 May 2006 15:29:28 -0600
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Sat, 27 May 2006 15:15:34 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <pqadOj-j3NO.A.zMF.2FMeEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "K. C. Herrick" <kchdlh@xxxxxxx>

OK--to continue with the vaporware, I'll post

http://hot-streamer.com/temp/TCH2UNE.JPG

Now there's nothing metallic, of substance, in the fluxfield. Also, I do away with the hinge and associated slidingcomponent. The rotor assembly rests on the coil at its two ends,now, and the (single) spring is on the center-line. The rotor slideson the washer that the spring presses against.

KCH

Prev by Date: Re: SISG
Next by Date: Fried Primary Transformer??
Previous by thread: Re: Continuously variable primary
Next by thread: Re: Continuously variable primary
Index(es):
- Date
- Thread